Pinhole photograph of the Phipps Conservatory and Botanical Gardens.
April 28th was
Worldwide Pinhole Photography Day
and I thought I would let you know what I did that day and then a little more about what I've been up to since I first posted about pinhole photography on this blog last month in a post titled:
.
Since I knew I would be in Pittsburgh for the weekend, I loaded my camera on Thursday night and began to figure out what I would photograph on Sunday the 28th. When the day arrived it was raining and just not very nice out, but I had to make do right? I've been experimenting with exposure times over the last month and in my previous two attempts, 40 seconds was too much in bright sun and two and half minutes was not enough indoors under a mixture of natural and artificial light. I've since come across lots of resources to help solve the exposure problem and look forward to sharing as the pinhole experiments continue.
28mm photograph from same location as pinhole camera which has a focal length of 76mm.
For a location, I decided to photograph the Phipps Conservatory and Botanical Gardens located in Schenley Park, one of Pittsburgh's largest greenspaces. Built in 1893, this great steel and glass Victorian greenhouse seemed like the perfect subject for my pinhole photograph.
My pinhole mounted on a bogen tripod placed atop a parking box.
I mounted the pinhole camera to a
Bogen table top tripod w/ ball head
and placed it atop a parking meter box in order to gain some height.
As I mentioned in my previous post, this particular pinhole camera was built from a kit that I received as a Christmas present about ten years ago. I applied a custom paint job and added a new base made from 5/8" MDF board so that I could attach a
in order to mount to a tripod.
Inside the wood box that makes up my pinhole camera is a paper sleeve that both holds the photographic paper in place and also is where the actual pin hole is located. The hole was produced using a #10 sewing needle which equates to 0.457mm, pretty standard for a pinhole camera. However, poking a needle through the paper sleeve does not produce a very clean hole so I plan on substituting a piece of metal, probably brass, in which I will drill a slightly larger .346mm hole, giving me an f-stop of 220, based on a focal length of 76mm. I'll go into this more in future posts.
Also since my last post, I exhausted the chemicals and paper that came with the kit, so I ordered
,
Ilford Multigrade paper developer
and
Ilford Multigrade IV RC Deluxe
5"x7" paper with a pearl finish from
. I cut the paper into 3"x3" sheets and mix the chemicals per directions.
My pinhole photograph from Sunday, along with a description can be found on the
website. Even though it is under exposed by about 15 seconds, at least I had something to submit.
Looking forward to writing more about pinhole in the future, possibly spinning off another blog. More to come.