Select USER SETTING > RESET in setup menu.
I think it is important to hit the reset button once in a while. Start over. Take a step back. Evaluate. Creatively or technically. In photography, it's popular to say that it isn't about the technology or the camera, it's about the creativity. Sometimes, however, the technology can affect the creative.
I've been shooting with my Fujifilm X-Pro2 for nearly two years. Shortly after receiving the camera I wrote a blog post titled: "Fujifilm X-Pro2 Initial Settings," and that was also the last time I took a deep dive into the entirety of the camera's menu system.
During the past few months there have been several occasions where I was seeing the photograph, but struggling with capturing what I was seeing. It seemed to be a case of technology getting in the way of the creative. Something that I never experienced before with the X-Pro2.
Over time a camera setting or two can get changed, new features are added via firmware updates (4.01 as of this blog), and before you know it, it's possible the technology no longer matches the creative. Or matches how you're used to capturing the creative.
Did I change or did the camera? I felt myself falling out of love with the camera, but I wasn't ready to get divorced. The X-Pro2 is still a top of the line camera and I see no reason to leave; maybe I just need a little marriage counseling. A reset button.
So with that in mind, I reset the camera to its factory defaults. A fresh start. Next, I opened the manual and went through every setting as if I had just purchased the camera. Lastly, I revisited that blog post from 2016 and compared those settings to what I had just done. Surprisingly, they matched up, with only one exception. I now use both Electronic Shutter (ES) and Mechanical Shutter (MS) depending on the situation. Most notably when using an electronic remote cable release, the camera must be set to MS.
There is no need to run through the initial settings again, you can go back and read them, however, I do want to talk about some choices I made that weren't available in 2016 when I wrote that initial blog post.
1. Copyright info in EXIF data. This allows you to register the photographer's name and the copyright holder's name in advance so that the camera automatically adds the information to EXIF data for each image.
I take the opportunity to add my email address instead of using my name twice.
2. Addition of "Eye Sensor + LCD Image Display" in the View Mode. This isn't an option I use all the time, but it does have some advantages, especially when shooting landscapes or if you need to compose a photograph while holding the camera away from your eye.
3. Voice Memo function. While not available during shooting, this function allows you to record a 30-second voice memo while in the playback mode. This is useful if you need to record a name or something special about a photograph without having to write it down.
Maybe, in the end, this is really more of a creative reset and I'm using the camera as an excuse. Nothing wrong with that.
Finally, another new feature now available is support for backup/restore of camera settings via FUJIFILM X Aquire. In the future, if I want to reset, I will no longer have to return to zero, I can just return to my proven settings that match my shooting style.